ODCE73
Odei tables
INDEPENDENT COMPLEMENT
The ODEI tables complete the collection of upholstered chairs with cantilevered backs to which they owe their name. A.G. de Vicuña proposes tables with simple lines and functional design that share shapes, materials and finishes with the chairs in the collection, which can accompany and complement them.
The Odei tables are presented with two characteristic models of metal legs or feet, built with the same identity as the chairs in the collection, and painted in the entire range of the sample collection, to easily support circular or rectangular tops that allow them to be used as a multifunctional table, meeting, dining or work table.
The ODEI tables incorporate rectangular and circular tops from the collection in plywood and laminate surfaces in various finishes and sophisticated perimeter lines. It is also possible to combine the Odei legs with functional tops from the Wide collection.
The ODEI tables are born as a complement to the chairs in the collection to take on their own identity as independent tables to combine with any other chair.
MODELS
ODLA73
TABLE FOOT
Metal base made of 73 cm high oval tube, in two models: fixed central foot with four legs and side feet with two legs each. Attached to an upper metal plate that serves as an anchor to the top, with the same arrangement of holes as the tops of the WIDE collection and the ODEI tops.
ODCE73: Fixed central base with 4 metal legs made of 40x20mm oval tube and welded to an upper metal plate for anchoring round and square tops, height 73cm, which can be combined with different tops, both circular (maximum Ø120cm) and square (maximum 90x90cm).
ODLA73: Structure composed of two sets of legs, one for each end, of 2 metal legs made of 40x20mm oval tube and welded together to a top plate made of sheet metal for anchoring rectangular tops, height 73cm, available for the rectangular table model (maximum 180x100cm). Independent anchoring plates for each top.
Painted in a wide range of epoxy paint colours according to Mobboli’s metallic samples.
ODT80
ODT100
ODT120
ODT88
ODT99
ODT169
COVERS
ODEI covers from your own collection or the possibility of combining with the functional covers from the WIDE collection. All caps have metric 6 (M-6) metal nuts embedded in them to attach to the top metal plate of each ODEI metal foot by means of threaded plate, easy to assemble and assemble to configure the ODEI table. ODEI table legs are suitable for circular tops up to 1200 mm diameter, square tops up to a maximum of 900 x 900 mm; and rectangular tops up to a maximum length of 1600 mm and a maximum width of 900 mm.
ODEI covers: Manufactured in 15mm plywood board and covered on the upper side with easy to clean and highly resistant plastic laminate in the following colours: Oak (RB); dark oak (RBO), white, black anti-fingerprint or anthracite anti-fingerprint. And they are available with a counter-traction on the underside. They share the same aesthetic design as the CUA collection tops, with bevelled edges varnished in their own colour, leaving the design visible in the plywood laminates. They have embedded nuts for anchoring to the ODEI foot plates.
WIDE covers: they are compatible with the ODEI legs and share references and prices (respecting the maximum dimensions allowed by the ODEI structure). See WIDE table references. Available in various finishes: compacmel, phenolic HPL, or stratified with rounded edges.
